FOCUS ON THE TASK
Keep work moving.
Reach to your vest, draw the sleeving and bring it to the conductor. SleeveMate keeps that everyday material close to the work, helping you maintain an organised routine through repeated second-fix tasks.
A NEW STANDARD FOR YOUR TOOLKIT INTRODUCING SLEEVEMATE — PRODUCT 001
Get launch updates
PURPOSEFUL TOOLS. PROPER WORK.
Small details.
Big difference.
For the people who take pride in the finish.
Meet TAB Pro. A considered approach to the electrical toolkit, starting with SleeveMate.
TAB PRO / EQUIPMENT SERIESNO. 001
TWIN VIEWING WINDOWS
REAR ATTACHMENT EYELET
CONTROLLED SLEEVING OUTLET
SleeveMateTHE FIRST CHAPTER.PRODUCT 001
APPROVED CAD VIEW
APPROVED CAD VIEW
FOR THE ELECTRICAL TRADEDETAILS THAT MATTERLESS FUSS. MORE FOCUS.A TOOLKIT WITH PURPOSE
01 / THE TAB PRO APPROACH
You care about your work.
So should your tools.
Good work is a hundred small details done right. The preparation. The organisation. The finish no one else notices. TAB Pro is for the people who notice.
We’re building a range with a simple ambition: make the everyday electrical toolkit more considered.
THE LAUNCH LINEUP001 / SLEEVEMATE
BRANDED LOCKING LID
HEX-DRIVE REFILL POINT
TWIST-LOCK INTERNAL SPOOL
PROTECTIVE HOUSING
MEET PRODUCT 001
SleeveMate.
The start of a better-considered toolkit.
SleeveMate is a compact, refillable dispenser for 2.0mm earth sleeving, worn at chest height on a work vest. Developed on the tools, it keeps sleeving visible and within easy reach in your working zone.
Draw sleeving directly from the dispenser as you make off conductors. With it there on your vest, reaching for the next length becomes part of the work, rather than a reason to leave it.
01
WHERE YOU NEED IT
At chest height, the dispenser stays in view and the outlet stays within reach. Take the length you need and bring it straight to the conductor you’re working on.
02
A MORE ORGANISED ROUTINE
Socket after socket, the same small movements matter. Giving earth sleeving a consistent place on your vest means less searching and fewer interruptions, with more attention on making off each conductor properly.
03
MADE TO BE USED. BUILT TO BE LOOKED AFTER.
Refillable, contained and given a proper place in the toolkit. Because equipment that works hard should be kept organised, protected and ready for the next job.
Within reach. Fewer interruptions. More attention on the job.
Be first to hearLaunch date, price and specifications to be confirmed.
THE WORK IS IN THE DETAILS
Consistency is built one termination at a time.
Good work is rarely one big gesture. It is preparation, rhythm and hundreds of small decisions made properly.
On the job, SleeveMate sits at chest height on the work vest. Sleeving is drawn straight from the outlet while conductors are made off, keeping the material and the next movement in the same working zone.
Second fix asks you to repeat that routine across sockets, switches and terminations. Keeping sleeving in a known, accessible place helps reduce interruptions and keeps the routine organised, so your attention stays on the work in front of you.
It is a practical detail in a day of hard work. A place for the material you need, and the care to make every termination count.
02 / THE STANDARD
No shortcuts.
No unnecessary extras.
Just a job done properly.
That’s the mindset.
That’s what we’re building for.
RESPECT THE DETAILS
Care about the finish.
Refill the removable internal spool from a larger reel using its integrated hex-drive refill point and a compatible driver. Secure the spool inside the housing with the twist-lock mechanism.
The twin viewing windows let you see the sleeving on the spool. The housing keeps it contained, with the outlet ready for the next draw. Load it, look after it and put it back to work.
CHOOSE WITH PURPOSE
Make room for better.
Developed on the tools and used during real second-fix work. The chest-mounted position, refillable spool and contained sleeving give an everyday material a proper place in your kit. Because looking after your tools is part of looking after the job.
03 / GOOD TO KNOW
Before it goes
in your kit.
A few things about our first launch.
What is SleeveMate?
SleeveMate is a compact, refillable dispenser for 2.0mm earth sleeving. It is worn at chest height on a work vest, keeping sleeving visible and within easy reach while you make off conductors.
How is it loaded and used?
Refill the removable internal spool from a larger reel using its integrated hex-drive refill point and a compatible driver. Secure the spool inside the housing with the twist-lock mechanism.
Wear SleeveMate at chest height on your work vest and draw the required length directly from the outlet as you make off conductors.
Why wear it at chest height?
Chest-height placement keeps the dispenser visible and the sleeving within easy reach in your working zone. You can draw directly from it during the job. Across repeated second-fix tasks, that consistent position helps keep the routine organised and reduces interruptions to your work.
Can SleeveMate be mounted anywhere else?
SleeveMate is designed to sit at chest height on a work vest, keeping the sleeving in view and within reach while making off. A belt-clip add-on is planned. We’re also exploring a magnetic mount for stationary work, but neither accessory is confirmed for the first batch.
When will it be available?
SleeveMate is currently being prepared for launch. Join the launch list to receive confirmed availability, final specifications and product updates.
INTRODUCING / TAB PRO JIG
Set it.
Level it.
Mark it.
TAB Pro Jig combines single and double socket setting-out in one clean guide, with integrated horizontal and vertical levels and clear 67.5 mm and 37.5 mm marking references.
View TAB Pro JigFirst batch: 10 units. £21.95, with UK Standard Tracked shipping charged separately at £2.95.
TAB PRO / SETTING-OUTFINALISED DESIGN
A MORE CONSIDERED START
One guide.
A clear starting point.
Choose the socket layout, check the levels and use the guide’s edges and centre references to mark out. A practical approach to keeping the next step clear and the work organised.
01
SINGLE AND DOUBLE SOCKET LAYOUTS
Both layouts in one guide, with a central dividing edge for single-socket setting-out.
02
TWO FITTED SPIRIT LEVELS
Integrated horizontal and vertical levels keep levelling part of the setting-out routine.
03
CLEAR CENTRE REFERENCES
67.5 mm and 37.5 mm markings provide defined reference points for marking-out.
04
A FINISHED TAB PRO DESIGN
Our signature black, white and copper finish. Dark, precise and unmistakably TAB Pro.
FROM DESIGN TO FINISHED PRINT
The detail,
made real.
The finished TAB Pro Jig, with both spirit levels fitted and every marking exactly where it belongs.
The design is finalised. In-use photographs and video against single and double back boxes will follow.
SLEEVEMATE / THE NEXT STEP
First batch.
A considered start. The first production batch of SleeveMate will be limited.
THE NEXT ADDITION TO YOUR KIT
Be there
from day one.
SleeveMate launch news. Product details. What comes next.
Get the updates that matter, straight to your inbox.